Mechanical Binding > Wire Binding

Wire Binding is a very high end product.  It is very attractive and elegant.  The element is a tooled piece of metal wire that consists of 3 loops per inch or 2 loops per inch.  The element comes shaped like a "U", the loop fingers are fed through square holes on the book block and then bent into a circle.  The book can lie flat, the pages can turn 360˚, and the pages will mirror each other when turned because the loops have no pitch.  Wire is ideal for any application where appearance is key.

 
 

eletric wire punch and manual bind machine 3:1Heavy Duty 3:1 Wire Electric Punching and Binding Machine

Made of sturdy die-casted metal rather than flexible sheet metal, the ETitanWire is the most heavy duty, reliable, user-friendly, and functional machine in its class.  DFG chose to use die-casted metal for the base and sides of the housing unit rather than using sheet metal for the punching surface to ensure your machine is solid in all the important places..

The BOB Wire E uses an encased lubrication system that drastically reduces friction and punch pin wear, which equates to longer machine life for the end user. High-speed, commercial punches that cost over $30,000 lubricate their punch pins. DFG utilizes this technology in our commitment to taking the extra step to deliver the best machine possible to the marketplace.

Utilizing full disengagement-pin our punched paper is free from partial punches, on any size project. Our disengagement-pin design uses independent coil spring mechanisms on each pull pin that allows the pins to disengage with a crisp snapping action.  Our punch pins are heat treated and precisely ground to ensure consistent, clean, punching.  The BOB Wire E punches square holes in 3:1 pitch. For 2:1 pitch, see the ETitanWire L.

Punch any length paper with our open throat and alignment pin.  Our design makes it possible to punch paper of any length with no restrictions. Whatever your paper size, you can punch it on the BOB Wire E.  After the first punch, put one hole through the alignment pin to keep your subsequent punches aligned correctly.  After the first punch, put one hole through the alignment pin to keep your subsequent punches aligned correctly.

DFG’s BOB Wire E has the best wire closer design on the market. It features two tapered steel closing blocks with CloseAssist™ finish, made in a precision-controlled environment. This design assures long-lasting wire closing quality, especially when compared to competing machines that use sandpaper or fabric covered sheet metal closer. Two adjustment knobs are standard, to assure even and accurate closing. This is VITAL to have consistent closure of elements, no matter whose wire you use.

With our specially designed Hi-Torq™ punch motor, torture tested for 3,000,000 cycles, the ETitanWire takes coil binding to the next level of convenience and ease. The ETitanWire can punch 28 sheets of 20 lb paper with the gentle push on a foot pedal, eliminating the manual punching strain on staff members.

The BOB Wire E is ETL certified, which means it has been thoroughly tested by an independent third party to ensure the highest safety standards are met.  Want to learn more about safety certification?  Visit our ETL vs. CE comparison page.

DFG enforces and abides by high quality and environmental standards, which is why we are ISO9002 and APQP certified.

 

BOB Wire E Benefits:

  • Heavy Duty Electric Punch: 28 sheets of paper (20 lbs)

  • Full Disengagement Pins: Ensures a completely clean professional punch without partial punches on any length of paper

  • Anti Jam Function: Automatically prevent jams before they happen

  • Side Margin Control:  Center punched holes quickly and easily

  • Wire Size Selector:  Built-in spring loaded indicator shows suggested wire size

  • Adjustable Punch Margin:  Assists in controlling the punch margin depth in order to maximize a book’s tear resistance

  • Open Throat Design with EasyPunch™: Easily punch any size book

  • ETL Certified: Entire machine was tested by an impartial third party to meet American safety standards as opposed to European CE certification. More about ETL vs CE

  • Extra-Large Waste Drawer

  • Non-Skid Feet: Firmly holds machine to work surface

  • Lightweight Design: Extensively utilized CAE (Computer Aided Engineering), greatly reduced machine weight

  • ISO9002 and APQP Certified: DFG enforces and abides by high quality and environmental standards.
       

Questions? Call DFG at (800) 480-4DFG for more information.

BOB Wire E Specification  

Model:

BOB WiRE E

Structure:

Solid die casted metal construction

Hole Pattern

3:1 pitch. 5/32” (4 mm) square holes

Punching Capacity

30 (20#) sheets per punch.

Disengagement Pins

Full set

Binding Capacity

3/16" to 1 1/4"

Punch Length

Any length thanks to the fully disengagement pins and open throat design

Power Supplier

110 V AC, 60 HZ

Warranty

One year

Safety Approval

America safety agency ETL listed

 

Back to Top
 

 
 
 

eletric wire punch and manual bind machine 3:1Heavy Duty 3:1 Wire Electric Punching and Binding Machine

Made of sturdy die-casted metal rather than flexible sheet metal, the ETitanWire is the most heavy duty, reliable, user-friendly, and functional machine in its class.  DFG chose to use die-casted metal for the base and sides of the housing unit rather than using sheet metal for the punching surface to ensure your machine is solid in all the important places..

The ETitanWire uses an encased lubrication system that drastically reduces friction and punch pin wear, which equates to longer machine life for the end user. High-speed, commercial punches that cost over $30,000 lubricate their punch pins. DFG utilizes this technology in our commitment to taking the extra step to deliver the best machine possible to the marketplace.

Utilizing full disengagement-pin our punched paper is free from partial punches, on any size project. Our disengagement-pin design uses independent coil spring mechanisms on each pull pin that allows the pins to disengage with a crisp snapping action.  Our punch pins are heat treated and precisely ground to ensure consistent, clean, punching.  The ETitanWire punches square holes in 3:1 pitch. For 2:1 pitch, see the ETitanWire L.

Punch any length paper with our open throat and alignment pin.  Our design makes it possible to punch paper of any length with no restrictions. Whatever your paper size, you can punch it on the ETitanWire.  After the first punch, put one hole through the alignment pin to keep your subsequent punches aligned correctly.  After the first punch, put one hole through the alignment pin to keep your subsequent punches aligned correctly.

DFG’s ETitanWire has the best wire closer design on the market. It features two tapered steel closing blocks with CloseAssist™ finish, made in a precision-controlled environment. This design assures long-lasting wire closing quality, especially when compared to competing machines that use sandpaper or fabric covered sheet metal closer. Two adjustment knobs are standard, to assure even and accurate closing. This is VITAL to have consistent closure of elements, no matter whose wire you use.

With our specially designed Hi-Torq™ punch motor, torture tested for 3,000,000 cycles, the ETitanWire takes coil binding to the next level of convenience and ease. The ETitanWire can punch 28 sheets of 20 lb paper with the gentle push on a foot pedal, eliminating the manual punching strain on staff members.

The ETitanWire is ETL certified, which means it has been thoroughly tested by an independent third party to ensure the highest safety standards are met.  Want to learn more about safety certification?  Visit our ETL vs. CE comparison page.

DFG enforces and abides by high quality and environmental standards, which is why we are ISO9002 and APQP certified.

 

ETitanWire Benefits:

  • Heavy Duty Electric Punch: 28 sheets of paper (20 lbs)

  • Full Disengagement Pins: Ensures a completely clean professional punch without partial punches on any length of paper

  • Anti Jam Function: Automatically prevent jams before they happen

  • Side Margin Control:  Center punched holes quickly and easily

  • Wire Size Selector:  Built-in spring loaded indicator shows suggested wire size

  • Adjustable Punch Margin:  Assists in controlling the punch margin depth in order to maximize a book’s tear resistance

  • Open Throat Design with EasyPunch™: Easily punch any size book

  • ETL Certified: Entire machine was tested by an impartial third party to meet American safety standards as opposed to European CE certification. More about ETL vs CE

  • Extra-Large Waste Drawer

  • Non-Skid Feet: Firmly holds machine to work surface

  • Lightweight Design: Extensively utilized CAE (Computer Aided Engineering), greatly reduced machine weight

  • ISO9002 and APQP Certified: DFG enforces and abides by high quality and environmental standards.
       

Questions? Call DFG at (800) 480-4DFG for more information.

ETitanWire Specification  

Model:

ETitanWire

Structure:

Solid die casted metal construction

Hole Pattern

3:1 pitch. 5/32” (4 mm) square holes

Punching Capacity

28 (20#) sheets per punch.

Disengagement Pins

Full set

Binding Capacity

3/16" to 1 1/4"

Punch Length

Any length thanks to the fully disengagement pins and open throat design

Power Supplier

110 V AC, 60 HZ

Warranty

One year

Safety Approval

America safety agency ETL listed

 

Back to Top

 

eletric wire punch and manual bind machine 3:1Heavy Duty 3:1 Wire Electric Punching and Binding Machine

Made of sturdy die-casted metal rather than flexible sheet metal, the EWire 3000 is the most heavy duty, reliable, user-friendly, and functional machine in its class.  DFG chose to use die-casted metal for the base and sides of the housing unit rather than using sheet metal for the punching surface to ensure your machine is solid in all the important places..

The EWire 3000 uses an encased lubrication system that drastically reduces friction and punch pin wear, which equates to longer machine life for the end user. High-speed, commercial punches that cost over $30,000 lubricate their punch pins. DFG utilizes this technology in our commitment to taking the extra step to deliver the best machine possible to the marketplace.

Utilizing full disengagement-pin our punched paper is free from partial punches, on any size project. Our disengagement-pin design uses independent coil spring mechanisms on each pull pin that allows the pins to disengage with a crisp snapping action.  Our punch pins are heat treated and precisely ground to ensure consistent, clean, punching.  The EWire 3000 punches square holes in 3:1 pitch. For 2:1 pitch, see the EWire 3000 L.

Punch any length paper with our open throat and alignment pin.  Our design makes it possible to punch paper of any length with no restrictions. Whatever your paper size, you can punch it on the EWire 3000.  After the first punch, put one hole through the alignment pin to keep your subsequent punches aligned correctly.  After the first punch, put one hole through the alignment pin to keep your subsequent punches aligned correctly.

DFG’s EWire 3000 has the best wire closer design on the market. It features two tapered steel closing blocks with CloseAssist™ finish, made in a precision-controlled environment. This design assures long-lasting wire closing quality, especially when compared to competing machines that use sandpaper or fabric covered sheet metal closer. Two adjustment knobs are standard, to assure even and accurate closing. This is VITAL to have consistent closure of elements, no matter whose wire you use.

With our specially designed Hi-Torq™ punch motor, torture tested for 3,000,000 cycles, the EWire 3000 takes coil binding to the next level of convenience and ease. The EWire 3000 can punch 28 sheets of 20 lb paper with the gentle push on a foot pedal, eliminating the manual punching strain on staff members.

The EWire 3000 is ETL certified, which means it has been thoroughly tested by an independent third party to ensure the highest safety standards are met.  Want to learn more about safety certification?  Visit our ETL vs. CE comparison page.

DFG enforces and abides by high quality and environmental standards, which is why we are ISO9002 and APQP certified.

 

EWire 3000 Benefits:

  • Heavy Duty Electric Punch: 28 sheets of paper (20 lbs)

  • Full Disengagement Pins: Ensures a completely clean professional punch without partial punches on any length of paper

  • Anti Jam Function: Automatically prevent jams before they happen

  • Side Margin Control:  Center punched holes quickly and easily

  • Wire Size Selector:  Built-in spring loaded indicator shows suggested wire size

  • Adjustable Punch Margin:  Assists in controlling the punch margin depth in order to maximize a book’s tear resistance

  • Open Throat Design with EasyPunch™: Easily punch any size book

  • ETL Certified: Entire machine was tested by an impartial third party to meet American safety standards as opposed to European CE certification. More about ETL vs CE

  • Extra-Large Waste Drawer

  • Non-Skid Feet: Firmly holds machine to work surface

  • Lightweight Design: Extensively utilized CAE (Computer Aided Engineering), greatly reduced machine weight

  • ISO9002 and APQP Certified: DFG enforces and abides by high quality and environmental standards.
       

Questions? Call DFG at (800) 480-4DFG for more information.

EWire 3000 Specification  

Model:

EWire 3000

Structure:

Solid die casted metal construction

Hole Pattern

3:1 pitch. 5/32” (4 mm) square holes

Punching Capacity

30 (20#) sheets per punch.

Disengagement Pins

Full set

Binding Capacity

3/16" to 1 1/4"

Punch Length

Any length thanks to the fully disengagement pins and open throat design

Power Supplier

110 V AC, 60 HZ

Warranty

One year

Safety Approval

America safety agency ETL listed

 

Back to Top
 

 

eletric wire punch and manual bind machine 2:1

Heavy Duty 2:1 Wire Electric Punching and Binding Machine

Made entirely of sturdy die-casted metal rather than flexible sheet metal, the ETitanWire L is the most heavy duty, reliable, user-friendly, and functional machine in its class.  DFG chose to use die-casted metal for the entire machine rather than using sheet metal for the punching surface to ensure your machine is solid and does not bow.

The ETitanWire L uses an encased lubrication system that drastically reduces friction and punch pin wear, which equates to longer machine life for the end user. High-speed, commercial punches that cost over $30,000 lubricate their punch pins. DFG utilizes this technology in our commitment to taking the extra step to deliver the best machine possible to the marketplace.

Utilizing full disengagement-pin our punched paper is free from partial punches, on any size project. Our disengagement-pin design uses independent coil spring mechanisms on each pull pin that allows the pins to disengage with a crisp snapping action.  Our punch pins are heat treated and precisely ground to ensure consistent, clean, punching. The ETitanWire L punches square holes in 2:1 pitch. For 3:1 pitch, see the ETitanWire.

DFG’s ETitanWire L has the best wire closer design on the market. It features two tapered steel closing blocks with CloseAssist™ finish, made in a precision-controlled environment. This design assures long-lasting wire closing quality, especially when compared to competing machines that use sandpaper or fabric covered sheet metal closer. Two adjustment knobs are standard, to assure even and accurate closing. This is VITAL to have consistent closure of elements, no matter whose wire you use.

With our specially designed Hi-Torq™ motor, torture tested for 3,000,000 cycles, the ETitanWire L takes wire binding to the next level of convenience and ease. The ETitanWire L can punch 28 sheets of 20 lb paper with the gentle push on a foot pedal, eliminating the manual punching strain on staff members. Our high punching capacity of 28 sheets gives you 12% more productivity over machines that punch only 25 sheets.

The ETitanWire L is ETL certified, which means it has been thoroughly tested by an independent third party to ensure the highest safety standards are met.  Want to learn more about safety certification?  Visit our ETL vs. CE comparison page.

DFG enforces and abides by high quality and environmental standards, which is why we are ISO9002 and APQP certified.

 

ETitanWire L Benefits:

  • Heavy Duty Electric Punch: 28 sheets of paper (20 lbs)

  • Full Disengagement Pins: Ensures a completely clean professional punch without partial punches on any length of paper

  • Anti Jam Function: Automatically prevent jams before they happen

  • Side Margin Control:  Center punched holes quickly and easily

  • Wire Size Selector:  Built-in spring loaded indicator shows suggested wire size

  • Adjustable Punch Margin:  Assists in controlling the punch margin depth in order to maximize a book’s tear resistance

  • Open Throat Design with EasyPunch™: Easily punch any size book

  • ETL Certified: Entire machine was tested by an impartial third party to meet American safety standards as opposed to European CE certification. More about ETL vs CE

  • Extra-Large Waste Drawer

  • Non-Skid Feet: Firmly holds machine to work surface

  • Lightweight Design: Extensively utilized CAE (Computer Aided Engineering), greatly reduced machine weight

  • ISO9002 and APQP Certified: DFG enforces and abides by high quality and environmental standards.

Questions? Call DFG at (800) 480-4DFG for more information.

ETitanWire L Specifications

Model:

ETitanWire L

Structure:

Solid die casted metal construction

Hole Pattern

2:1 pitch. Rectangular holes.

Punching Capacity

1-28 (20#) sheets per punch

Disengagement Pins

Full set

Binding Capacity

1/2" to 1 1/8"

Punch Length

Any length thanks to the fully disengagement pins and open throat design

Power Supplier

110 V AC, 60 HZ

Warranty

One year

Safety Approval

America safety agency ETL listed

Back to Top

 
 

manual wire punch and bind machine 3:1Heavy Duty 3:1 Manual Wire Punch and Binding Machine

Made of sturdy die-casted metal rather than flexible sheet metal, the TitanWire is the most heavy duty, reliable, user-friendly, and functional machine in its class.  DFG chose to use die-casted metal for the base and sides of the housing unit rather than using sheet metal for the punching surface to ensure your machine is solid in all the important places..

The TitanWire uses an encased lubrication system that drastically reduces friction and punch pin wear, which equates to longer machine life for the end user. High-speed, commercial punches that cost over $30,000 lubricate their punch pins. DFG utilizes this technology in our commitment to taking the extra step to deliver the best machine possible to the marketplace.

Utilizing the world's first full disengagement-pin design for coil binding machines (recently copied by other manufacturers), our punched paper is free from partial punches, on any size project. Our disengagement-pin design uses independent coil spring mechanisms on each pull pin that allows the pins to disengage with a crisp snapping action.  Our punch pins are heat treated and precisely ground to ensure consistent, clean, punching. The TitanWire can punch square holes in up to 25 pages of 20lb paper in a pitch of 3:1. For 2:1 pitch, see the TitanWire L.

Punch any length paper with our open throat and alignment pin.  Our design makes it possible to punch paper of any length with no restrictions. Whatever your paper size, you can punch it on the ETitanWire.  After the first punch, put one hole through the alignment pin to keep your subsequent punches aligned correctly.  After the first punch, put one hole through the alignment pin to keep your subsequent punches aligned correctly. 

DFG’s TitanWire has the best wire closer design on the market. It features two tapered steel closing blocks with CloseAssist™ finish, made in a precision-controlled environment. This design assures long-lasting wire closing quality, especially when compared to competing machines that use sandpaper or fabric covered sheet metal closer. Two adjustment knobs are standard, to assure even and accurate closing. This is VITAL to have consistent closure of elements, no matter whose wire you use.

DFG enforces and abides by high quality and environmental standards, which is why we are ISO9002 and APQP certified.

 

TitanWire Benefits:

  • Heavy Duty Electric Punch: 25 sheets of paper (20 lbs)

  • Full Disengagement Pins: ensures a completely clean professional punch without partial punches on any length of paper

  • Anti Jam Function: Automatically prevent jams before they happen

  • Side Margin Control:  Center punched holes quickly and easily

  • Wire Size Selector:  Built-in spring loaded indicator shows suggested wire size

  • Adjustable Punch Margin:  Assists in controlling the punch margin depth in order to maximize a book’s tear resistance

  • Open Throat Design with EasyPunch™: Easily punch any size book

  • Extra-Large Waste Drawer

  • Non-Skid Feet: Firmly holds machine to work surface

  • Lightweight Design: Extensively utilized CAE (Computer Aided Engineering), greatly reduced machine weight

  • ISO9002 and APQP Certified: DFG enforces and abides by high quality and environmental standards.
       


Questions? Call DFG at (800) 480-4DFG for more information.

TitanWire Specification  

Model:

TitanWire

Structure:

Solid die casted metal construction

Hole Pattern

3:1 pitch. 5/32” (4 mm) square holes

Punching Capacity

25 (20#) sheets per punch

Disengagement Pins

Full for completely clean punching with any paper

Binding Capacity

1/2" to 1 1/8"

Punch Length

Any length thanks to the fully disengagement pins and open throat design

Warranty

One year


Back to Top

 
 

Heavy Duty 2:1 Manual Wire Punch and Binding Machinemanual wire punch and bind machine 2:1

Made of sturdy die-casted metal rather than flexible sheet metal, the TitanWire L is the most heavy duty, reliable, user-friendly, and functional machine in its class.  DFG chose to use die-casted metal for the base and sides of the housing unit rather than using sheet metal for the punching surface to ensure your machine is solid in all the important places.

The TitanWire L uses an encased lubrication system that drastically reduces friction and punch pin wear, which equates to longer machine life for the end user. High-speed, commercial punches that cost over $30,000 lubricate their punch pins. DFG utilizes this technology in our commitment to taking the extra step to deliver the best machine possible to the marketplace.

Utilizing the world's first full disengagement-pin design for coil binding machines (recently copied by other manufacturers), our punched paper is free from partial punches, on any size project. Our disengagement-pin design uses independent coil spring mechanisms on each pull pin that allows the pins to disengage with a crisp snapping action.  Our punch pins are heat treated and precisely ground to ensure consistent, clean, punching. The TitanWire L can punch square holes in up to 25 pages of 20lb paper in a pitch of 2:1. For 3:1 pitch, see the TitanWire.

DFG’s TitanWire L has the best wire closer design on the market. It features two tapered steel closing blocks with CloseAssist™ finish, made in a precision-controlled environment. This design assures long-lasting wire closing quality, especially compared to competing machines' sandpaper or fabric covered sheet metal closer. Two adjustment knobs are standard, to assure even and accurate closing. This is VITAL to consistent closure of elements, no matter whose wire you use.

DFG enforces and abides by high quality and environmental standards, which is why we are ISO9002 and APQP certified.

 

TitanWire L Benefits:

  • Heavy Duty Electric Punch: 28 sheets of paper (20 lbs)

  • Full Disengagement Pins: ensures a completely clean professional punch without partial punches on any length of paper

  • Anti Jam Function: Automatically prevent jams before they happen

  • Side Margin Control:  center holes quickly and easily

  • Wire Size Selector:  Built-in spring loaded indicator shows suggested wire size

  • Adjustable Punch Margin:  Assists in controlling the punch margin depth in order to maximize a book’s tear resistance

  • Open Throat Design with EasyPunch™: Easily punch any size book

  • ISO9002 and APQP Certified: DFG enforces and abides by high quality and environmental standards.

  • Non-Skid Feet: Firmly holds machine to work surface

  • Lightweight Design: Extensively utilized CAE (Computer Aided Engineering), greatly reduced machine weight

 

Questions? Call DFG at (800) 480-4DFG for more information.

TitanWire L Specification:

Model:

TitanWire L

Structure:

Solid die casted metal construction

Hole Pattern

2:1 pitch. Rectangular holes

Punching Capacity

28 (20 lb) sheets per punch

Disengagement Pins

Full for completely clean punching with any paper

Binding Capacity

3/16" to 1 1/4"

Punch Length

Any length thanks to the fully disengagement pins and open throat design

Warranty

One year

 

Back to Top

 
 
Information Coming Soon...Please call us at (800) 480 - 4DFG.

Back to Top

 
 

Made of a sturdy die-casted metal base and a strong plastic housing unit, the Wire200 is a light duty, reliable, user-friendly machine. 

The Wire200 can punch up to 12 sheets of 20lb paper in one punch.

The Wire200 is a manual punch and binding machine with wire closer. It is perfect for offices, POD printers, and copy shops.

DFG enforces and abides by high quality and environmental standards, which is why we are ISO9002 and APQP certified.

 

Wire200 Benefits:

  • Sturdy metal construction: very durable

  • 12 sheet punch capacity (20 lb.), 11" standard punch width

  • Disengageable pins: None

  • Punch width up to 21" using open-throat design

  • Adjustable Punch Margin: improve all books' strength and design

  • Side Margin Control: center holes quickly and easily

  • Non-Skid Feet: Firmly holds machine to work surface

  • Lightweight Design: Extensively utilized CAE (Computer Aided Engineering), greatly reduced machine weight

  • ISO9002 and APQP Certified: DFG enforces and abides by high quality and environmental standards.


Call DFG at (800) 480-4DFG for a quote today.

Model:

Wire200

Punch Capacity

1-15 sheets per punch

Disengagement Pins

None

Binding Capacity

Manual binding to any size

Punch Length

21" with open throat design

Hole Pattern

3:1 pitch. 5/32” (4 mm) square holes

Warranty

One year

 

Back to Top